My Love

How to Apply Your DTF Transfers

Our DTF transfers are designed to be easy to apply and durable when pressed correctly. For best results, always use a heat press. While household iron may work in some cases, it does not provide consistent heat or pressure. A heat press is strongly recommended and produces the BEST results.

Heat, time, and pressure are all important. Always test press on a scrap garment when possible.

Pressing Instructions by Fabric Type

Cotton (100% cotton tees, hoodies, etc.)

• Temperature: 300–325°F (150–163°C)
• Time: 12–15 seconds
• Pressure: Medium to firm, even pressure
• Cold Peel: Peel film back slowly from edge
• 2nd press: 8 - 13 seconds with parchment or Teflon recommended.

Polyester / Performance Fabrics

·         Temperature: 285–300°F (140–150°C)

·         Time: 10–12 seconds

·         Pressure: Light to medium

·         2nd press: 8 - 13 seconds with parchment or Teflon recommended

Cotton/Poly Blends

• Temperature: 300°F (150°C)
• Time: 12–15 seconds
• Pressure: Medium
• 2nd press: 8 - 13 seconds with parchment or Teflon recommended.

Sizing Recommendations for Designs

These are general guidelines to help you choose sizing that looks proportional on most garments:

• Adult: 11" wide 
• Youth: approx. 9" wide
• Toddler: approx. 7" wide
• Baby: approx. 5" wide

For narrow and tall designs, children’s sizes are best determined by height, not width.

Important Notes & Disclaimer

• Always follow your garment care and heat settings
• Press on a flat, even surface only
• Avoid seams, zippers, or thick edges under the press

iNKMe Stitch and Printz will not be held responsible for the sizing you choose for your custom project or finished garments. All sizing selections are the responsibility of the customer.